6 Series M6 (S85) Coupe
Replace filter element.
Warning!
Danger of scalding!
Carry out all tasks only when wearing oil-resistant, heat-
resistant protective gloves incl. underarm protection, face
guard and protective apron.
Open screw plug (1) with socket and a long extension (2).
Installation:
Replace sealing ring.
Tightening torque: 11 13 1AZ
.
Tilt long extension (1) with socket and screw plug in direction of
arrow.
Catch and dispose of engine oil with suitable equipment.
Pour in engine oil.
Important!
To prevent the possibility of overfilling, fill the engine initially
with 8 litres of engine oil.
Park vehicle on a horizontal surface.
Start engine and run at idle until an engine oil temperature
≥
70
°
is
reached.
Press on-board computer button for longer than 3 seconds.
Determine the oil level again.
Measurement range from minimum to maximum = 1 litre.
1.
Oil level (+0.6 l)
2.
Range for maximum
3.
Range for minimum
The oil fill quantity is 0.6 l above the permissible minimum.
Top-up quantity to be calculated:
1 litre - 0.6 litre (display) = 0.4 litre top-up quantity.
Important!
A replenishment quantity of less than 0.5 litre is not
displayed in the instrument cluster: i.e. interrogating the oil
level again produces the value (+0.6 l) again.
RA Engine oil service (S85)
BMW AG - TIS
19.01.2013 13:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
