6 Series M6 (S85) Coupe
Tighten down cylinder head bolts from inside to outside in
sequence (1 to 12).
Tightening torque: 11 12 1AZ
.
Insert screws (1).
Tightening torque: 11 12 1AZ
.
Installation:
Modifying check valves, refer to SI-11 01 05 Fault memory
entries in DME.
In engines where it is not possible to connect check valves,
replace the vacuum-controlled check valves with self-opening
check valves.
Vacuum lines will then no longer be required.
Assemble engine.
RA Removing and installing left cylinder head (S85)
BMW AG - TIS
19.01.2013 13:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
