6 Series M6 (S85) Coupe
22 31 001
Replacing rubber mount for transmission
mounting
Necessary preliminary tasks:
•
Remove underbody protection
•
Remove complete exhaust system
•
If necessary, remove exhaust system bracket
•
Support transmission with hydraulic lifter.
If necessary, remove heat shield (1) on left and right.
Note:
N53 only
Release cable from holders (1).
Remove cable from holders on heat shield.
Note:
Illustration similar
Release screws (1) and nuts (2) and remove transmission
cross-member.
Remove transmission mount from transmission cross-member.
Tightening torque 23 71 2AZ/5AZ
.
Note:
Illustration similar.
RA Replacing rubber mount for transmission mounting
BMW AG - TIS
19.01.2013 14:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -