6 Series M6 (S85) Coupe
Mount special tool 24 0 200 on transmission.
24 0 202 spindle with thrust piece is not needed.
Important!
Before mounting on assembly stand 00 1 450 , check
retaining bridge for secure seating.
Release screw (2).
Tightening torque 23 41 26AZ
.
Installation:
Use high-temperature-resistant cable ties (approx. 140
°
).
If necessary, clean internal thread of screw housing (2).
Insert screw (2) with Loctite 243.
Release screw (1).
Tightening torque 23 41 24AZ
.
Installation:
If necessary, clean internal thread of housing.
Release screws (1).
Tightening torque 23 41 26AZ
.
Installation:
If necessary, clean internal thread of housing.
RA Replacing complete hydraulic unit (GS7S47BG SMG)
BMW AG - TIS
19.01.2013 14:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
