6 Series M6 (S85) Coupe
Release screws.
Tightening torque 23 41 28AZ
.
Installation:
Replace screws.
Lever actuator block out of housing with a suitable tool (plastic
wedge).
Important!
-
Do not lever between actuator block and housing.
Sealing faces can be damaged.
-
Do not lever on valves (1).
Important!
Cover transmission with a clean, fluff-free cloth.
Do not allow any dirt or contaminants to get into the
transmission.
Clean sealing surfaces.
Installation:
Adapter sleeves (1) must be replaced if they remain in the
actuator block during removal.
Before assembly:
Important!
Align shift forks (1) in transmission in centre position.
Apply a thin coating of Loctite 5203 (2).
RA Replacing complete hydraulic unit (GS7S47BG SMG)
BMW AG - TIS
19.01.2013 14:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -