6 Series E64 635d (M57T2) CONVER
Lock threaded pin with internal Torx and release nuts.
Tightening torque 54 31 23AZ
.
Note:
The right side is removed in the same way as the left side.
Disconnect cable straps (1) on left and right.
Installation:
Replace faulty cable straps.
Release screws (2) on left and right.
Tightening torque 54 31 22AZ
.
Stow convertible top with assistance of a second person uniformly
in convertible soft top compartment.
Release left and right screws (1).
Tightening torque 54 31 22AZ
.
Left side:
Unfasten plug connection (1) and disconnect.
Unclip cable from retainers.
Detach cable straps (2).
Installation:
Replace faulty cable straps (2).
Unfasten plug connections (3) and disconnect.
RA Removing and installing complete EH convertible top
BMW AG - TIS
03.02.2013 04:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -