6 Series E64 645Ci (N62) CONVER
-
Remove propeller shaft from transmission.
-
Release centre bearing.
-
Tie propeller shaft to one side.
Tasks are described in Removing propeller shaft.
Disconnect plug connections (1) and (2).
Release cable strap (3).
Disconnect plug connections (1) and (2) and unclip cable from
holder.
Detach plugs (4) from clutch travel sensor.
RA Removing and installing transmission (GS6S53BZ SMG)
BMW AG - TIS
04.02.2013 06:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
