7 Series E38 740d (M67) SAL
Release screw connection (1).
Tightening torque, 13 53 8AZ
.
Disconnect pressure line (2).
E38 only:
Detach cover (1) towards top.
Unscrew nut (2).
Tightening torque, 12 51 4AZ
.
Lay battery positive lead (3) to one side.
E38 only:
Note:
Catch and dispose of escaping fuel.
Detach fuel line (1) at filter unit.
Unclip fuel lines (2) from holders (3).
Lay fuel lines (2) to one side.
Remove holder (1).
Release cable tie (2).
Release clamp (3).
Remove hose (4).
RA Removing and installing, sealing or replacing left cylinder head cover (M67)
BMW AG - TIS
10.02.2013 02:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -