7 Series E38 740d (M67) SAL
Release all bolts on cylinder head cover.
Remove cylinder head cover (1).
Remove gaskets (1).
Note:
Clean sealing faces on cylinder head and cylinder head cover.
Undo screw (1).
Convert camshaft sensor (2) to new cylinder head cover.
Installation note:
Replace seal (1) if damaged.
RA Removing and installing, sealing or replacing left cylinder head cover (M67)
BMW AG - TIS
10.02.2013 02:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
