7 Series E38 740d (M67) SAL
Convert holder (1) to new cylinder head cover.
E38 only:
Loosen screws (1).
Tightening torque, 12 52 4AZ
.
Convert battery positive connection point (2) to new cylinder head
cover.
Convert rubber grommets (1) to new cylinder head cover.
Note:
Replace seals.
Installation note:
-
Install gasket (1).
-
Fit sealing washer (2).
-
Insert sleeve (3) in sealing washer (2).
RA Removing and installing, sealing or replacing left cylinder head cover (M67)
BMW AG - TIS
10.02.2013 02:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
