7 Series E38 740d (M67) SAL
11 13 020
Removing and installing, sealing or replacing
lower oil sump section (M67)
Drain engine oil,
refer to 00 00 250.
Remove underbody panelling at front.
Turn tensioning roller on screw (1) in direction of arrow.
Lay ribbed V-belt (2) to one side.
Unscrew bolt (1).
Unfasten cable tie (2).
Disconnect plug (1).
Release screws (2).
Tightening Torque,
refer to 11 13 2AZ.
Take down power steering pump (3) from upper oil sump section.
RA Removing and installing, sealing or replacing lower oil sump section (M67)
BMW AG - TIS
10.02.2013 02:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -