7 Series E38 740d (M67) SAL
11 14 145
Replacing radial seal on crankshaft sprocket
wheel (M67)
Remove vibration damper,
refer to 11 23 010.
Fit special tool 11 1 212 to crankshaft.
Screw special tool 11 8 111 into radial seal.
Detach radial seal by screwing in special tool 11 8 112.
Remove radial seal.
Screw special tool 11 6 490 into crankshaft and tighten down.
RA Replacing radial seal on crankshaft sprocket wheel (M67)
BMW AG - TIS
10.02.2013 02:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
