7 Series E38 740d (M67) SAL
Lift back cover (1).
Unscrew nut (2).
Tightening torque,
refer to Technical Data 12 51 4AZ.
Detach battery positive lead (3) from positive support point for
jump starting.
Remove fan cowl,
refer to 17 11 031.
Release screw (1) on clamp (2).
Note:
Remove underbody panelling at front and rear.
RA Removing and installing/replacing battery positive lead (between starter motor a
BMW AG - TIS
10.02.2013 03:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
