7 Series E38 740d (M67) SAL
Disconnect plug (1) from air-mass flow sensor on left and right.
If necessary, unclip cable.
Remove and install intake air manifold,
refer to 11 61 050.
Unscrew bolt (1).
Disconnect plug (1) from double temperature switch for coolant.
Disconnect plug (2) from exhaust turbocharger.
Disconnect plug (3) from high-pressure pump.
RA Replacing wiring harness section for engine (M67)
BMW AG - TIS
10.02.2013 03:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -