7 Series E38 740d (M67) SAL
13 32 051
Replacing fuel filter (M67)
Caution!
Turn off ignition.
Catch and dispose of escaping fuel.
After work has been completed, the fuel system must be vented
between the tank and the high-pressure pump!
If the feed line to the high-pressure pump is not vented after work
has been completed, this may result in the pump running dry and
being damaged.
Note:
To avoid damaging the high-pressure pump, it is absolutely
essential to vent the fuel
presupply system, refer to 13 31 015.
Press locking springs (1) and at same time disconnect fuel lines.
Disconnect fuel lines.
Disconnect plug (2).
Detach fuel line (3) from retaining clips.
Release nuts (4).
Remove fuel filter unit (5).
Detach fuel filter (1) from filter unit (2).
Note:
If the fuel filter (1) is seated too tightly, use special tool
11 4 650.
Tightening torque,
refer to text on fuel filter.
RA Replacing fuel filter (M67)
BMW AG - TIS
10.02.2013 03:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
