7 Series E38 740d (M67) SAL
13 53 155
Removing and installing/replacing pressure
accumulator of injection system (M67)
Note:
Switch off ignition.
Note:
The following text describes the removal of the left pressure
accumulator. The same procedure applies to removing the right
pressure accumulator.
Remove pressure lines between pressure accumulator and
injectors.
Release union nuts (1, 2 and 3) of pressure lines.
Tightening torque, 13 53 8AZ
.
Release screws (4) on holder.
Installation:
Note different screw lengths.
Remove pressure accumulator (5).
RA Removing and installing/replacing pressure accumulator of injection system (M67)
BMW AG - TIS
10.02.2013 03:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
