7 Series E38 740d (M67) SAL
Open locks (1) on both sides.
Slide locks (1) forwards on both sides up to stop.
Press catches (1) on both sides in direction of arrow and at same
time pull out intercooler (2) a little.
Pull out intercooler (2) and remove towards bottom.
Installation:
Do not damage intercooler fins during installation.
Installation:
If necessary, replace holder (2).
Press bar (1) upwards with a regular screwdriver.
Pull out holder (2).
RA Removing and installing/replacing intercooler (M67)
BMW AG - TIS
10.02.2013 04:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
