7 Series E38 740d (M67) SAL
Installation:
Install bolts (1) with narrow shoulder only with washers.
Fit screws (2) with wide collar without any shims.
Installation:
When installing the transmission, special tool 24 2 300 must
be aligned with bore in drive plate.
Installation:
Bore (1) in drive plate must be accessible from aperture in oil
pan.
Installation:
Screw special tool 24 2 300 into the threaded bore (1).
If applicable, twist torque converter until bore with special tool
24 2 300 points downwards.
RA Removing and installing automatic transmission (M67 with A5S 560Z)
BMW AG - TIS
10.02.2013 04:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -