7 Series E38 740d (M67) SAL
32 13 060
Removing and installing power steering (M67)
Caution!
If the steering gear is replaced, check the height of the pitman
arm to the idler arm,
refer to 32 21 510.
Recycling:
Observe country-specific waste-disposal regulations.
Draw off hydraulic fluid from container - do not reuse.
Installation:
Top up and bleed hydraulic system,
refer to 32 13 006.
Remove steering wheel,
refer to 32 33 000.
Unscrew and remove splash guard.
Remove heat shield.
Suspend engine from special tool 00 0 200.
RA Removing and installing power steering (M67)
BMW AG - TIS
10.02.2013 05:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -