7 Series E38 740iL (M60-2) SAL
Height adjustment of engine hood on hood locks:
Close engine hood carefully.
Determine height setting.
The hood lid should be at the same height as the front side panels
beside the headlights.
Tolerance - 1 mm, i.e. hood lid must lie 1 mm below side panels.
Measure deviation.
Raise engine hood.
Unfasten screw (1) and remove locking device (2).
Unfasten locking device until deviation from height setting has
been corrected.
Perform operation on left and right sides.
Refit locking device.
Close hood lid, check height beside the headlights and correct if
necessary.
RA Aligning engine hood
BMW AG - TIS
14.02.2013 13:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -