7 Series E38 750iL (M73) SAL
Loosen screws (1).
Lift timing case upwards to remove.
Installation
Removal and installation of the upper timing case are described
separately.
Sealing surfaces on both cylinder banks clean and free of oil.
Caution!
Note installation direction of seals.
Insert seals so that sealant bead (1) faces timing case.
Check that dowel sleeves are undamaged and correctly located.
Replace seals (1 and 2) on both cylinder banks.
RA Removing and installing/sealing or replacing timing case at top (M73)
BMW AG - TIS
20.02.2013 17:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
