7 Series E38 750iL (M73) SAL
Unfasten screws in non-return valve (1) for cylinders 1 to 6 to
pressure pipe (2) and remove non-return valve.
Installation:
Replace gasket.
Unfasten hose clip on pressure pipe for air pump. Remove hose.
Unfasten pressure pipe (1) from brackets and remove.
Installation:
The spacer disc (2) must be fitted under the bracket (1) to
the water pump to prevent the pressure pipe from being
subjected to tension.
RA Removing and installing / replacing non-return valve (cylinder bank 1-6) (M73)
BMW AG - TIS
20.02.2013 17:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
