7 Series E38 750iL (M73) SAL
11 72 054
Removing and installing replacing non-return
valve (cylinder bank 7-12) (M73)
Compress retainer (2) and push off connector (1).
Open clips (1).
Unfasten hose clip (2) on intake hose for the air pump. Remove
hose.
Disconnect plug connection (3).
Unfasten hose clip (4).
Remove complete upper section of intake filter housing.
Remove fan coupling with fan wheel,
refer to 11 52 020
Unclip oil drip tray.
RA Removing and installing replacing non-return valve (cylinder bank 7-12) (M73)
BMW AG - TIS
20.02.2013 17:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -