7 Series E38 750iL (M73) SAL
1.
Non-return valve for cylinder bank 1 to 6
2.
Non-return valve for cylinder bank 7 to 12
Unfasten hose clip (1) to non-return valve for cylinder
bank 7 to 12 and remove pressure hose.
Unfasten hose clip to non-return valve for cylinder bank 1 to 6,
then remove pressure hose.
Unfasten hose clip on pressure pipe for air pump. Remove hose.
RA Removing and installing replacing non-return valve (cylinder bank 7-12) (M73)
BMW AG - TIS
20.02.2013 17:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -