7 Series E38 750iL (M73) SAL
Installation:
To ensure that screw head does not twist away when
attaching the hose clip (1), it must be tight against stop (2).
Installation:
Release hose clamp (1), withdraw hose.
Installation:
Fit hose (1) with hose clip (2) on neck in wheel arch.
Installation:
Slide lower section of intake filter housing onto hose (1).
Tighten down hose clip.
RA Removing and installing left intake filter housing (M73)
BMW AG - TIS
20.02.2013 19:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -