7 Series E38 750iL (M73) SAL
13 71 020
Removing and installing right intake filter
housing (M73)
Switch off ignition.
Loosen retainers (1).
Unfasten hose clip (2).
Disconnect plug-in connection (3).
Remove upper section of intake filter housing.
Unfasten screw. Remove lower section of suction filter housing.
Installation:
To ensure screw head does not twist away when screwing
down the hose clip (1), it must be tightened up to stop (2).
RA Removing and installing right intake filter housing (M73)
BMW AG - TIS
20.02.2013 19:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -