7 Series E38 750iL (M73) SAL
33 21 000
Removing and installing or replacing output
shaft
Remove exhaust system,
refer to 18 00 020 .
M67 Remove exhaust system,
refer to 18 00 018 .
Remove wheel,
refer to 36 10 300 .
Unfasten screws.
Installation:
Use washers (1).
Tightening torque,
refer to Technical Data 33 21 1AZ .
Unfasten collar nut (1).
Installation:
Replace collar nut.
Tightening torque,
refer to Technical Data 33 41 3AZ .
Secure collar nut (1) by peening.
Press out output shaft with special tool 33 2 111 / 116 / 117.
RA Removing and installing or replacing output shaft
BMW AG - TIS
20.02.2013 22:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
