7 Series E38 L7 (M73) SAL
Cut off nozzle to inside diameter (A).
(A) = approx. 3 mm
If applicable, produce a sample bead before gluing.
No adhesive is applied in area (A).
Apply adhesive in adhesive channel (2) of trim strip (1).
(A) = 10 mm
Push trim strip (1) onto side window (2).
Push seal (3) onto trim strip (2).
RA Removing and installing/replacing trim (side window) on door pillar (center door
BMW AG - TIS
22.02.2013 04:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 15 -
