7 Series E38 L7 (M73) SAL
Replacing cover for cup holder (with wooden finisher):
Open cup holder.
Note:
If necessary, use a hand mirror (1) for better visibility.
Unhook rack (2) from front section (3) towards right.
Unlock hook (1) on left/right in center area of cup holder front
section (2) and detach from cup holder rear section (3).
Note:
If necessary, use a hand mirror for better visibility.
Installation:
Rack (1) on cup holder (2) must not be damaged.
Installation:
During installation, rack (1) must be hooked into bore (2) in
cup holder (3) and snapped into place.
RA Removing and installing/replacing wooden finisher and front section on cup holde
BMW AG - TIS
22.02.2013 05:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -