7 Series E65 735i (N62) SAL
Unfasten screws.
Remove spacer (3) upwards.
Installation:
Replace sealing ring.
Remove injection pipe
Release screw connections (1, 2, 3 and 4).
If necessary, pull out oil dipstick.
Remove cylinder head cover.
Installation:
Note installation direction of sealing ring (1).
Groove in sealing ring (1) points outwards.
Replace sealing ring (1) and press into cylinder head cover until
flush.
RA Removing and installing/sealing left cylinder head cover (N62/N62TU)
BMW AG - TIS
08.02.2013 02:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -