7 Series E65 735i (N62) SAL
Insert special tools 11 8 151 and 11 8 152 in conrod.
N62 B44
Lightly coat pistons and piston rings with oil.
Offset the contact points of the piston rings by approx. 120
°
to
each other but do not position above the piston pin boss.
Compress piston rings with special tool 11 9 500 .
N62 B44
Keep piston rings compressed with special tool 11 9 500 .
Install piston so that arrow points to camshaft drive.
Caution!
Danger of piston ring failure.
Only press pistons into place with finger force - do not knock in!
N62 B36
Lightly coat pistons and piston rings with oil. Offset the contact
points of the piston rings by approx. 120
°
to each other but do not
position above the piston pin boss.
Slide special tool 11 8 141 over piston (1).
Install piston so that arrow points to camshaft drive.
Caution!
Danger of piston ring failure.
Only press pistons into place with finger force - do not knock in!
RA Removing and installing/replacing all pistons (N62)
BMW AG - TIS
08.02.2013 02:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
