7 Series E65 735i (N62) SAL
Attach crankpin to connecting rod.
Remove special tools 11 8 151 and 11 8 152 .
Note:
For purposes of clarity, the pairing letters (1) are shown on the
removed conrod.
Caution!
Conrods and conrod bearing caps are denoted with the same
pairing letters (1), do not mix them up.
Apply light coat of oil to connecting-rod bearing shells.
Fit bearing cap so that pairing letters match up.
Install new connecting-rod screws.
Secure conrod with special tool 00 9 120 .
Tightening torque 11 24 1AZ
.
RA Removing and installing/replacing all pistons (N62)
BMW AG - TIS
08.02.2013 02:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
