7 Series E65 735i (N62) SAL
12 14 522
Replacing pulse generator on left inlet
camshaft (N62, N62TU)
(cylinder bank 5 to 8)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit; if necessary,
work through test schedules
•
Switch off ignition
•
Remove acoustic cover
•
Remove left ignition coil cover
Release plug connector (1) and pull off.
Release screw.
Remove pulse generator (2).
Installation:
Replace sealing ring and coat with antiseize agent.
RA Replacing pulse generator on left inlet camshaft (N62, N62TU)
BMW AG - TIS
08.02.2013 04:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
