7 Series E65 735i (N62) SAL
33 53 000
Removing and installing / replacing rear left
or right coil spring
Important!
Except E67:
Both coil springs on the relevant axle must be replaced only in
the event of corrosion breakage!
E67 only:
For safety reasons, both coil springs on the relevant axle must
always be replaced on safety vehicles!
Note:
The coil spring is allocated in the Electronic Parts
Catalogue (ETK) under the menu item "Spring table" after the
vehicle identification number has been entered and the relevant
optional extra of the car has been selected.
Note:
Procedure is described in the document "Rear spring strut shock
absorber ...".
RA Removing and installing / replacing rear left or right coil spring
BMW AG - TIS
08.02.2013 07:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
