7 Series E65 735i (N62) SAL
51 11 156
Removing and installing/replacing front
bumper trim (BMW ALPINA B7)
Necessary preliminary tasks:
•
Remove both protective strips
•
Remove baseplate for number/license plate
•
Remove underbody protection.
Remove cover (1) and air duct (2) on left/right.
Disconnect plug connection (1) on left/right.
Release screws (2) on bracket (3) on left/right.
Release screws (1) or clip (1) on left/right.
RA Removing and installing/replacing front bumper trim (BMW ALPINA B7)
BMW AG - TIS
08.02.2013 10:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
