7 Series E65 735i (N62) SAL
Note:
Spray nozzle cannot be adjusted.
Important!
Risk of damage!
Fold wiper arm onto windshield before turning on terminal "R"
or ignition.
Switch on terminal "R".
Move windshield washer system into rest position by one-
touch wiping.
Removing right spray nozzle:
Necessary preliminary tasks:
•
Remove right windshield wiper arm
Unlock high-pressure nozzle (1) and remove in direction of arrow.
Release locks of multifunction element (2).
Remove multifunction element (2).
Installation:
Make sure high-pressure nozzle (1) and multifunction
element (2) are correctly locked in wiper arm.
RA Removing and installing/replacing a jet nozzle in windshield washer system
BMW AG - TIS
08.02.2013 17:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
