7 Series E65 735i (N62) SAL
64 52 523
Replacing A/C system compressor (N62,
without Dynamic Drive)
Warning!
Risk of injury!
Refrigerant circuit is under high pressure!
Follow safety instructions for handling R 134a refrigerant .
Avoid contact with refrigerant and refrigerant oil.
Follow safety instructions for handling refrigerant oil.
Important!
Risk of damage!
Restart engine only when A/C system has been correctly
filled.
Read and comply with notes on replacing compressor.
Follow instructions for opening and replacing parts in
refrigerant circuit!
If A/C system is opened for more than 24 hours:
Replacing drier insert for A/C system
Necessary preliminary tasks:
•
Drawing off, evacuating and filling the A/C system are not
included in the time value given for this work operation
•
Remove intake filter housing
•
Remove front underbody protection
•
Remove A/C compressor drive belt
Release screws (1).
Remove lines (2) and (3).
Installation:
Replace all sealing rings and moisten with refrigerant oil.
Tightening torque 64 52 1AZ
.
RA Replacing A/C system compressor (N62, without Dynamic Drive)
BMW AG - TIS
08.02.2013 18:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -