7 Series E65 735i (N62) SAL
Disconnect plug connection (1).
Note:
Secure A/C compressor (3) against falling out.
Release screw (2) and remove with bushing behind.
Tightening torque 64 52 3AZ
.
Installation:
Make sure bushing is correctly fitted.
Replace damaged bushings.
Release screws (4) and remove A/C compressor (3) in direction
of arrow.
After installation:
•
Evacuate and fill A/C system
RA Replacing A/C system compressor (N62, without Dynamic Drive)
BMW AG - TIS
08.02.2013 18:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -