7 Series E66 735Li (N62) SAL
32 31 095
Removing and installing / replacing steering
column control unit (CIM)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Important!
To avoid damaging the control unit, make sure when installing
that the baseplate is not subjected to tension.
After installation:
•
Replacement only: Initialize steering column using BMW
diagnosis system (control unit functions)
Necessary preliminary tasks:
•
Remove panel for (active) knee protector
Disconnect plug connection.
Release screws and remove steering column control unit.
Tightening torque 32 31 9AZ
.
RA Removing and installing / replacing steering column control unit (CIM)
BMW AG - TIS
08.02.2013 20:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -