7 Series E66 735Li (N62) SAL
When correctly adjusted, no gap can be seen between special
tool and wiper blade.
Adjusting left wiper arm:
Adjustment is carried out with a second person assisting.
Remove cover cap (1) in direction of arrow.
Installation:
Make sure locks (1) are correctly engaged.
Loosen nut (1).
Wiper blade must rest above marking (2) on windscreen.
Place special tool 00 9 331 at height of pivot point of wiper blade
on windscreen.
Turn wiper arm until no gap can be seen between special tool
00 9 331 and wiper blade.
Hold wiper arm in this position and tighten down nut (1).
Tightening torque 61 61 12AZ
.
Perform one-touch wiping twice. Check adjustment and repeat if
necessary.
Adjusting right wiper arm:
Adjustment is carried out with a second person assisting.
Remove cover (1).
RA Checking/adjusting contact angle of windscreen wiper arms on windscreen
BMW AG - TIS
09.02.2013 04:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
