X Series E53 X5 3.0d (M57) OFFRD
Note:
Do not damage oil filter cap (2), release and tighten down with a
socket only.
When the oil filter cap is opened, the oil flows from the oil-water
heat exchanger back into the sump.
Release screw (1) on return pipe.
Release oil filter cap (2).
Remove oil filter element.
Detach plug (3) from oil pressure switch.
Installation:
Replace sealing rings and coat with oil.
Detach hose (1).
Release screws (2).
Remove oil filter housing together with oil-water heat exchanger
(3).
Release screws on oil-water heat exchanger (1).
Remove oil-water heat exchanger (1) from oil filter housing (2).
RA Removing and installing/sealing or replacing oil filter housing (M57)
BMW AG - TIS
03.02.2013 19:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
