X Series E53 X5 3.0d (M57) OFFRD
Installation:
Retaining clip (1) on sealing cap (2) must be attached to heat
shield.
Installation:
Replace damaged plugs without fail. Clip in the three plugs (1)
from above.
Release screws (1).
Installation:
Apply a thin coat of copper paste (CRC) to threads of screws (1).
Tightening torque,
refer to Technical Data 11 65 1AZ.
Remove front underbody protection.
Remove reinforcement plate.
Remove exhaust pipe.
RA Removing and installing or replacing exhaust turbocharger (M57)
BMW AG - TIS
03.02.2013 19:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -