bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Replacing Battery Positive Lead (between Battery Positive Terminal, Starter Moto|Page 660 > < 2 RA Replacing Solenoid Switch
Page 1
background image

12 42 500

Replacing battery positive lead (between
battery positive terminal, starter motor and
alternator) (M57)

Read fault memory. Switch off ignition.

Observe safety instructions for handling vehicle battery.

Observe instructions for disconnecting and connecting battery.

Disconnect battery negative lead and lay to one side.

Release nut.

Fold down protective cap (1).

Release nut (2).

Installation:

Tightening torque, 12 51 4AZ.

Remove battery positive lead from support point.

Unclip battery positive lead from retainers.

RA  Replacing battery positive lead (between battery positive terminal, starter moto

BMW AG - TIS

03.02.2013  19:32

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Replacing Battery Positive Lead (between Battery Positive Terminal, Starter Moto|Page 660 > < 2 RA Replacing Solenoid Switch