bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Replacing Battery Positive Lead (between Battery Positive Terminal, Starter Moto|Page 661 > < 1 RA Replacing Battery Positive Lead (between Battery Positive Terminal, Starter Moto
Page 2
background image

Raise intake hood (1) approx. 5 cm.

Detach air ducts from fuel cooler (2), intake muffler and intake
hood (1).

Release screws (1).

Remove acoustic cover at front (2).

Note:

Photos similar to E53/M57.

Release nut (1) on starter motor.

Installation:

Tightening torque, 12 41 4AZ.

Disconnect battery positive lead (3) from starter motor.

Remove protective cap (1).

Release nut of battery positive lead (2) on alternator.

Installation:

Tightening torque, 12 31 1AZ.

Unclip battery positive lead (2) from holder (3).

Remove battery positive lead (2).

RA  Replacing battery positive lead (between battery positive terminal, starter moto

BMW AG - TIS

03.02.2013  19:32

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

1 RA Replacing Battery Positive Lead (between Battery Positive Terminal, Starter Moto|Page 661 > < 1 RA Replacing Battery Positive Lead (between Battery Positive Terminal, Starter Moto