X Series E53 X5 3.0i (M54) OFFRD
22 11 100
Replacing right engine support arm (M54)
Special tools required:
•
00 0 200
Remove air duct for intake air.
Release engine mounts on left and right from above.
Raise engine with special tool 00 0 200 , described in
Removing oil sump.
Remove engine splash guard.
Detach grounding cable from support arm.
Detach engine support arm from engine block.
Installation:
Observe different thread length.
Install longer screw at top center.
RA Replacing right engine support arm (M54)
BMW AG - TIS
06.02.2013 18:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -