X Series E53 X5 4.4i (M62) OFFRD
Align camshafts.
Fit special tool 11 2 446 / 442 to camshafts on cylinder bank
5 to 8.
Caution!
Do not damage the cylinder head.
Align camshafts with an open-end wrench so that special
tools 11 2 442 / 446 rest without a gap on the cylinder head.
Fit special tool 11 2 443 to special tool 11 2 446 / 442 and
secure with special tool 11 2 444 using the spark plug thread.
Lift timing chain and hold under tension.
Crank engine from 45
°
before TDC position in direction of rotation
up to TDC position.
Secure crankshaft with special tool 11 5 180 in TDC position.
Caution!
Remove special tool 11 5 180 before starting engine.
RA Removing and installing left cylinder head (M62)
BMW AG - TIS
08.02.2013 01:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
