X Series E53 X5 4.4i (M62) OFFRD
Release bellows on throttle. Remove upper section of suction filter
housing with mass air flow sensor.
Release guide tube for oil dipstick on right side of timing case
cover.
Note:
The supports (1) of special tool 00 0 208 must make
contact with the screws on the side walls.
Fit special tool 00 0 200 to special
tool 00 0 201 / 202 / 204 / 208 and attach.
Caution!
The engine has another center of gravity.
Attach special tool 11 0 000 as shown in illustration to
special tool 00 0 200. Only in this way can you ensure that
the engine hangs horizontally when the front axle support is
released.
Caution!
Only attach engine to relevant suspension lugs.
RA Removing and installing/replacing upper section of oil sump (M62)
BMW AG - TIS
08.02.2013 01:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
