X Series E53 X5 4.4i (M62) OFFRD
Remove alternator drive belt,
refer to 11 28 010.
Remove vane pump from oil sump,
refer to 32 41 060.
Note:
Lines remain connected.
Tie vane pump to one side.
Relieve tension on A/C compressor drive belt and remove
adjustable plate from oil sump,
refer to 11 28 050.
Open oil drain plug and drain off engine oil.
Remove lower oil sump section,
refer to 11 13 020.
Unfasten guide tube for dipstick on oil sump.
Installation:
Replace O-ring.
Insert O-ring and washer in oil sump bore.
Detach oil return line coming from oil separator from oil sump.
Installation:
Replace sealing ring.
Tightening torque,
refer to Technical Data 11 42 8AZ.
RA Removing and installing/replacing upper section of oil sump (M62)
BMW AG - TIS
08.02.2013 01:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
