X Series E53 X5 4.4i (M62) OFFRD
Release nut (2).
Tightening torque, 12 51 4AZ.
Remove battery positive lead from positive support point for jump
starting.
Note:
Interrogate fault memory of DME control unit.
Check stored fault messages.
Rectify faults.
Now clear the fault memory.
RA Removing and installing or replacing battery positive lead (between starter moto
BMW AG - TIS
08.02.2013 02:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
