X Series E53 X5 4.4i (M62) OFFRD
32 32 001
Replacing complete steering lock
Caution!
After assembly, check all functions of ignition starter switch,
indicator lamps, wipers etc.
Remove upper steering spindle bearing.
Remove ring antenna.
If necessary, remove cable for Interlock.
Unfasten screw and lift off bracket for wiring harness.
Unlock connector from ignition starter switch and remove.
Unfasten shear-off screw with tool, e.g. chisel.
Remove plate (1) and steering lock (2).
Installation:
Tighten new shear-off screws to shearing point.
RA Replacing complete steering lock
BMW AG - TIS
08.02.2013 05:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
